top of page
Process2Wipe_logo.jpg
IP70ScreenImage.jpg

Process2Wipe® IPA70

Process2Wipe ® IPA70 wipes are ready-to-use and saturated with VAI®’s low endotoxin DECON-AHOL WFI® Formula, a 70% USP Isopropyl Alcohol formulated with 30% Water for Injection. These wipes can be used in both aseptic and non-aseptic wipe downs of filling and packaging machinery, stainless steel surfaces, lexan, polycarbonate, glass, and any critical surface that requires cleaning. Pre-saturated wipers, including Process2Wipe, can prevent the overuse of chemicals and reduce costs. Process2Wipe is available sterile in a standard 9”x9” (23 cm x 23 cm) size. Process2Wipe wipes are filled in ISO 5 (Grade A/B, Former Class 100), filtered at 0.2 microns, and subsequently terminally sterilized to 10-6 sterility assurance level. Individual lots are sterility tested according to current USP compendium, are completely traceable, and completely validated for sterility and shelf life. Process2Wipe wipes are delivered each time with lot specific Certificate of Analysis, LAL Test Report, Certificate of Irradiation, Certificate of Sterility, and Certificate of Conformance. The material used in our Process2Wipe is a white, non-woven 100% polyester material that has low shedding characteristics and is manufactured to be clean and absorbent by minimizing fiber and particulate release. VAI’s Process2Wipe is packaged in an opaque, ported, peel and reseal style bag with 50 wipers per bag. The peel and reseal style bag allows for continued use after opening. Each sterile wiper bag is double bag packaged and available in our ABCD Cleanroom Introduction System® for easy introduction into the core and other critical environments.

Process2wipe.jpg
Applications
  • Aseptic or non-aseptic environments

  • Wipe downs on filling and packaging machinery

  • Spill control

  • On lexan, glass, polycarbonate, stainless steel or any other critical surface that requires cleaning

  • To prevent overuse of Isopropyl Alcohol when compared to using trigger sprayers or gallon pour

  • General wiping and contamination control

Process2wipe2.jpg
Quality & Manufacturing
  • Filled in ISO 5 (Grade A/B, Former Class 100)

  • 70% USP IPA formulated with 30% USP Water for
    Injection is filtered at 0.2 microns

  • Gamma irradiated at 10-6 SAL

  • Lot sterility tested according to current USP
    Compendium

  • Completely lot traceable

Allrpods.jpg
Features And Benefits
  • Each sterile bag is double bagged in easy tear bags

  • Quadruple bagged via the ABCD Cleanroom Introduction System®

  • Packaged in an opaque bag

  • Peel and reseal label for continued use after opening

  • Individually labeled with lot number and expiration

  • Reduced VOC’s

  • Low endotoxins

  • For use on multiple surfaces

  • Wipes folded for easy removal

  • 100% polyester non-woven material designed to be clean and absorbent

  • Material has low shedding characteristics

  • 9”x9” (23 cm x 23 cm) size

  • Ready-to-use

  • Delivered with lot specific Certificate of Sterility, Certificate of Irradiation, Certificate of
    Analysis, LAL Test Report, and Certificate of Conformance

Steriperox_wide.jpg

STERI-PEROX® Wipe 3% & 6%

Hydrogen Peroxide and Water for Injection Solution Pre-Saturated 100% Polyester Wipe

STERI-PEROX® Wipes are saturated with a ready-to-use 3% or 6% concentration of hydrogen peroxide solution formulated with Water for Injection. These wipes can be used in both aseptic and non-aseptic wipe downs of filling and packaging machinery, stainless steel surfaces, lexan, polycarbonate, glass, and any critical surface that requires cleaning. Ideal use is in broad or intricate locations where the need to reduce possible VOC’s is required. Pre-saturated wipers, including STERI-PEROX Wipes, can prevent the overuse of chemicals and reduce costs. STERI-PEROX Wipes are available in a standard 12”x12” (30.5 cm x 30.5 cm) size and either sterile or non-sterile.

 

STERI-PEROX Wipes are manufactured via aseptic fill at 0.2 microns into gamma irradiated sterile components in ISO 5 (Grade A/B, Former Class 100). Individual lots are lot sterility tested according to current USP compendium, are completely traceable, and completely validated for sterility and shelf life. STERI-PEROX Wipes are delivered each time with lot specific Certificate of Analysis,
Certificate of Sterility, and Certificate of Conformance. 


The material used in our STERI-PEROX Wipes is a 100% continuous knit polyester filament that has been specifically designed to be exceptionally clean and absorbent. Particulates, residues, and foreign matter is effectively entrapped in the webbing of the material. The knit construction and pattern has been developed to ensure the greatest product integrity and cleaning performance while offering high resistance to abrasion and picking.


FocusEdge cutting technology is the standard that VAI® uses to cut their wipes. This cutting method does not heat the yarn bundles as high as lasers, therefore, eliminating the small plastic balls that form on the end of every yarn strand. Due to the wipe’s sealed edges, shedding is minimal during wipe downs or general use, therefore, reducing particulates in controlled environments. After cutting, the
wipes are then laundered in ISO Class 4 conditions to ensure cleanliness. 

VAI’s STERI-PEROX Wipes are packaged in an opaque, ported, peel and reseal style bag. The addition of a user-friendly peel and reseal label, that covers the opening of the bag, allows continued use after opening. Each sterile wiper bag is double bag packaged and available in our ABCD Cleanroom Introduction System® for easy introduction into the core or other critical environments.

Manu.jpg
Applications
  • Aseptic or non-aseptic environments

  • Wipe downs on filling and packing machinery

  • Spill control

  • On lexan, glass, polycarbonate, stainless steel or any other critical surface that requires cleaning

  • To reduce VOC’s

  • To prevent overuse of hydrogen peroxide when compared to using trigger sprayers or gallon pour

peroxApplication.jpg
Quality & Manufacturing
  • Wipe material laundered in ISO 4 (Grade A/B, Former
    Class 10)

  • Hydrogen peroxide solution is filtered at 0.2 microns

  • Filled in ISO 5 (Grade A/B, Former Class 100)

  • Formulated with Water for Injection

  • Cut using FocusEdge cutting technology

  • Aseptically filled into sterile components via gamma
    irradiation at 10-6 SAL

  • Lot sterility tested according to current USP
    Compendium

  • Completely lot traceable

  • Completely validated for sterility and shelf life

Wipes2.jpg
Features And Benefits
  • ISO 5 (Grade A/B, Former Class 100) Cleanliness

  • Each sterile bag is double bagged in easy tear bags

  • Quadruple bagged via the ABCD Cleanroom
    Introduction System®

  • Packaged in an opaque bag

  • Peel and reseal label for continued use after opening

  • Individually labeled with lot number and expiration

  • Two concentrations: 3% or 6% to fit your specific
    needs

  • Reduced VOC’s

  • For use on multiple surfaces

  • Ready-to-use

  • Wipes folded for easy removal

  • 100% synthetic filament polyester constructed in a
    continuous knit that minimizes fiber and particulate
    release

  • Material is exceptionally clean and absorbent

  • Resistance to abrasion and picking

  • FocusEdge allows for minimal shedding via sealed
    edges

  • Standard 12”x12” size (30.5 cm x 30.5 cm)

  • Delivered with lot specific Certificate of Analysis,
    Certificate of Sterility, and Certificate of Conformance

bottom of page